C613-50631-01 Rev A Command Reference for IE340 Series 454
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOGGING COMMANDS
LOG
FACILITY
Example To specify a facility of local6, use the following commands:
awplus# configure terminal
awplus(config)# log facility local6
Related
commands
show log config
ftp FTP daemon
local<0..7> The facility labels above have specific meanings, while the
local facility labels are intended to be put to local use. In
AlliedWare Plus, some of these local facility labels are used
in log messages. In particular, local5 is assigned to log
messages generated by UTM Firewall security features.
Table 10-1: Ordinary meanings of the facility parameter in log messages (cont.)
Facility Description
To Next Page
Loading...
Need help?
General
