C613-50631-01 Rev A Command Reference for IE340 Series 626
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SWITCHING COMMANDS
SWITCHPORT
PORT-SECURITY AGING
To return to static mode by stopping the MAC addresses that have been learned
by port security from aging out on port1.0.2, use the following commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no switchport port-security aging
Related
commands
clear port-security intrusion
show port-security interface
show port-security intrusion
switchport port-security
switchport port-security maximum
switchport port-security violation
Command
changes
Version 5.5.1-0.1: port-security on LAGs added for SBx81CFC960, SBx908 GEN2,
x950, x930, x550, x530, x530L, x320, x230, x230L and x220 Series switches
To Next Page
Loading...
Need help?
General
