Allied Telesis IE340 Series - Page 643

C613-50631-01 Rev A Command Reference for IE340 Series 643
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VLAN COMMANDS
PRIVATE
-VLAN
To configure a private VLAN for Upward Forwarding Only (UFO), use the following
commands:
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# vlan 512 name vlan512 state enable
awplus(config-vlan)# private-vlan 512 ufo
Related
commands
show vlan private-vlan
Command
changes
Version 5.4.7-2.1: ufo parameter added
Version 5.4.8-2.1: ufo parameter added to SBx8100 Series products
Version 5.4.9-0.1: ufo parameter added to x530 Series products