C613-50631-01 Rev A Command Reference for IE340 Series 648
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VLAN COMMANDS
SHOW
INTERFACE SWITCHPORT VLAN TRANSLATION
Related
commands
switchport vlan translation
switchport vlan translation default drop
Command
changes
Version 5.4.8-0.2: added to SBx908 GEN2, x930 Series products
Version 5.4.8-1.1: added to SBx8100 Series products
Version 5.4.9-0.1: added to x530 Series products
Table 16-1: Parameters in the output from show interface switchport vlan
translation
Parameter Description
Interface The interface on which VLAN-IDs will be translated.
VLAN on Wire VLAN-ID of the packet as it will be seen on the wire.
VLAN VLAN-ID of the VLAN as it was assigned when the VLAN
was created.
Outer Vlan VLAN-ID of the outer-tag-VLAN added by VLAN
double-tagging.
default The action taken on inbound tagged packets that do not
match a VLAN translation entry; either drop or accept.
To Next Page
Loading...
