Allied Telesis IE340 Series - Page 685

C613-50631-01 Rev A Command Reference for IE340 Series 685
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VLAN COMMANDS
VLAN
Examples To enable VLAN 45, use the commands:
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# vlan 45 name accounts state enable
To destroy VLAN 45, use the commands:
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# no vlan 45
To create a management-only VLAN with VID 100, use the commands:
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# vlan 100 state management-only
Related
commands
mtu
vlan database
show vlan
Command
changes
Version 5.4.9-2.1: Parameter management-only added
Version 5.5.0-1.3: Support for up to 5 VLANs added to AR1050V