C613-50631-01 Rev A Command Reference for IE340 Series 837
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
POWER OVER ETHERNET COMMANDS
SHOW
POWER-INLINE INTERFACE DETAIL
Related
commands
show power-inline
show power-inline interface
Command
changes
Version 5.4.8-0.2: added to x550 series products
Detection of
legacy
devices is
The status of legacy PoE detection on the PoE port (enabled or
disabled), as configured for the PoE port with the power-inline
allow-legacy command. Legacy detection involves measuring for
a large capacitance value to confirm the presence of a legacy PD.
Powered pairs The IEEE 802.3af and IEEE 802.3at standards allow for either data
or spare twisted pairs to be used to transfer power to a PD.
Table 4: Parameters in show power-inline interface detail output (cont.)
Parameter Description
To Next Page
Loading...
Need help?
General
