Allied Telesis IE340 Series - Page 1115

C613-50631-01 Rev A Command Reference for IE340 Series 1115
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPF COMMANDS
AREA
VIRTUAL-LINK
Example To configure a virtual link, use the commands:
awplus# configure terminal
awplus(config)# router ospf 100
awplus(config-router)# area 1 virtual-link 10.10.11.50
hello-interval 5 dead-interval 10
Related
commands
area authentication
show ip ospf
show ip ospf virtual-links