C613-50631-01 Rev A Command Reference for IE340 Series 2153
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
SHOW
MLS QOS INTERFACE
Command
changes
Version 5.5.1-0.1: DSCP queue mapping removed from output
Queue Limit The percentage of the port’s buffers that have been
allocated to this queue.
Egress Rate Limit The amount of traffic that can be transmitted via this
queue per second. 0 Kb means there is currently no
rate-limiting enabled.
Egress Traffic
Shaping Overhead
The number of bytes specified to allow for the size of
packet preamble and inter-packet gap (the “overhead”) in
egress queue rate limiting. Use the egress-rate-limit
overhead command to change this.
Table 42-2: Parameters in the output of the show mls qos interface command
Parameter Description
To Next Page
Loading...
Need help?
General
