Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2600
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DHCP SNOOPING COMMANDS
SHOW
IP DHCP SNOOPING STATISTICS
Table 60: Example output from the show ip dhcp snooping statistics detail command
awplus# show ip dhcp snooping statistics detail

DHCP Snooping Statistics:
Interface ........................................ port1.0.1, All counters 0
Interface ........................................ port1.0.2, All counters 0
Interface ........................................ port1.0.3, All counters 0
Interface ........................................ port1.0.4
In Packets ..................................... 50
In BOOTP Requests ............................ 25
In BOOTP Replies ............................. 25
In Discards .................................... 1
Invalid BOOTP Information .................... 0
Invalid DHCP ACK ............................. 0
Invalid DHCP Release or Decline .............. 0
Invalid IP/UDP Header ........................ 0
Max Bindings Exceeded ........................ 1

Option 82 Insert Error ....................... 0

Option 82 Received Invalid ................... 0

Option 82 Received On Untrusted Port ......... 0

Option 82 Transmit On Untrusted Port ......... 0
Reply Received On Untrusted Port ............. 0
Source MAC/CHADDR Mismatch ................... 0
Static Entry Already Exists .................. 0
Interface ........................................ port1.0.5, All counters 0
Interface ........................................ port1.0.6, All counters 0
Table 61: Parameters in the output from the show ip dhcp snooping statistics
command
Parameter Description
Interface The interface name.
In Packets The total number of incoming packets that are processed
by DHCP Snooping.
In BOOTP Requests The total number of incoming BOOTP Requests.
In BOOTP Replies The total number of incoming BOOTP Replies.
In Discards The total number of incoming packets that have been
discarded.
Invalid BOOTP
Information
Packet contained invalid BOOTP information, such as an
invalid BOOTP.OPCode.
Invalid DHCP ACK A DHCP ACK message was discarded, for reasons such as
missing Server Option or Lease Option.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English