Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2601
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DHCP SNOOPING COMMANDS
SHOW
IP DHCP SNOOPING STATISTICS
Related
commands
clear ip dhcp snooping statistics
ip dhcp snooping
ip dhcp snooping violation
Invalid DHCP
Release or Decline
A DHCP Release or Decline message was discarded, for
reasons such as mismatch between received interface
and current binding information.
Invalid IP/UDP
Header
A problem was detected in the IP or UDP header of the
packet.
Max Bindings
Exceeded
Accepting the packet would cause the maximum
number of bindings on a port to be exceeded.
Option 82 Insert
Error
An error occurred while trying to insert DHCP Relay
Agent Option 82 information.
Option 82 Received
Invalid
The DHCP Relay Agent Option 82 information received
did not match the information inserted by DHCP
Snooping.
Option 82 Received
On Untrusted Port
A packet containing DHCP Relay Agent Option 82
information was received on an untrusted port.
Option 82 Transmit
On Untrusted Port
A packet containing DHCP Relay Agent Option 82
information was to be sent on an untrusted port.
Reply Received On
Untrusted Port
A BOOTP reply was received on an untrusted port.
Source MAC/CHADDR
Mismatch
The L2 Source MAC address of the packet did not match
the client hardware address field (BOOTP.CHADDR).
Static Entry
Already Exists
An entry could not be added as a static entry already
exists.
Table 61: Parameters in the output from the show ip dhcp snooping statistics
command (cont.)
Parameter Description

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English