C613-50631-01 Rev A Command Reference for IE340 Series 2627
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OPENFLOW COMMANDS
SHOW
OPENFLOW STATUS
Related
commands
show openflow flows
show openflow rules
show openflow config
Command
changes
Version 5.4.6-1.1: command added
Version 5.4.7-1.1: command added to GS900MX, XS900MX, x550 series products
Version 5.4.7-2.1: command added to IE300, IE500 series products
Version 5.4.8-0.2: added to SBx908 GEN2
Version 5.4.8-1.1: added to IE210L series products
frags: The action for the IP fragments: normal, dropped, or
reassembled. Normal means that an attempt should be
made to pass the fragments through the OpenFlow tables.
miss_send_len=0: The number of bytes of each packet that was sent to the
OpenFlow controller when a flow table fails or reaches the
controller
Table 52-5: Parameters in the output from show openflow status (cont.)
Parameter Description
To Next Page
Loading...
Need help?
General
