Allied Telesis IE340 Series - Page 3196

C613-50631-01 Rev A Command Reference for IE340 Series 3196
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SNMP COMMANDS
SNMP
-SERVER ENABLE TRAP
To disable the device from sending MAC address Thrash Limiting traps, use the
following commands:
awplus# configure terminal
awplus(config)# no snmp-server enable trap thrash-limit
To enable the device to send OSPF and VRRP-related traps, use the following
commands:
awplus# configure terminal
awplus(config)# snmp-server enable trap ospf vrrp
To disable OSPF traps being sent out by the device, use the following commands:
awplus# configure terminal
awplus(config)# no snmp-server enable trap ospf
Related
commands
show snmp-server
show ip dhcp snooping
snmp trap link-status
snmp-server host
trap (g8032-switch)
private-vlan ufo trap
Command
changes
Version 5.4.7-2.1: ufo parameter added
Version 5.5.1-1.1: atmfguestnode and cwmap parameters added
Version 5.5.1-2.1: mac-change, mac-move, and mac-threshold parameters
added