Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 393
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
CONNECTIVITY FAULT MANAGEMENT COMMANDS
SHOW
ETHERNET CFM MAINTENANCE-POINTS LOCAL MEP
Related
commands
clear mep counter
ethernet cfm mep
show ethernet cfm details
Error CCM Reason The reason that the local MEP is detecting the
errorCCMdefect condition (if any):

Wrong MEP ID Received - CCM received with correct level
and MAID, but MEP ID has not been configured in this MA.

My MEP ID Received - CCM received with correct level and
MAID, but an MEP ID that is the same as a local MEP in this
MA.

My MEP ID Received (loop) - as above, but the CCM
received also has the same MAC address as the local MEP
in the MA.

CCM Interval Mismatch - CCM received with correct level
and MAID, but CCM interval does not match that
configured for this MA.

MAC address mismatch - for a configured unicast RMEP
(via crosscheck) the MAC address did not match the
provisioned value in the associated MA.

N/A - indicates there is no error CCM defect being
detected.
Last Error CCM If an errorCCMdefect condition is detected, portions of the
CCM that caused this condition are displayed.
Cross Connect
Defect Reason
The reason that the local MEP is detecting the
xconCCMdefect condition (if any):

Wrong MAID - CCM received with correct level but
incorrect MAID (mismatch in the domain name and/or
short MA name versus configured).

Wrong Level - CCM received with a level that is lower than
the level configured for this local MEP's domain.

N/A - indicates there is no error CCM defect being
detected.
Last Cross Connect
CCM
If a xconCCMdefect condition is detected, portions of the
CCM that caused this condition are displayed.
Table 9-5: Parameters in the output from show ethernet cfm
maintenance-points local mep domain <domain-name> service
<ma-name> mep <mep-id> details (cont.)
Parameter Description

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English