List of parameters
Parameters
1-103
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Displays the firmware version of the Voltage Sensing Module (VSM).
Dependency: Refer to: r0018, r0128, r0158, r0197, r0198
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
Description: Displays the firmware version of the Sensor Module.
Dependency: Refer to: r0018, r0128, r0158, r0197, r0198
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
Description: Sets the number of VSM data sets
Description: The VSM data set is assigned to a VSM evaluation using this parameter.
r0148[0...n] Voltage Sensing Module firmware version / VSM FW version
A_INF, S_INF Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: p0140 Func. diagram: -
P-Group: Encoder Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
r0148[0...n] Sensor Module firmware version / SM FW version
SERVO, VECTOR Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: EDS, p0140 Func. diagram: -
P-Group: Encoder Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
p0150 Number of VSM data sets / VSM count
VECTOR Can be changed: C1(3) Calculated: - Access level: 4
Data type: Unsigned8 Dynamic index: - Func. diagram: -
P-Group: Data sets Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
1 2 1
p0151[0...n] Voltage Sensing Module component number / VSM comp_no
VECTOR Can be changed: C1(4) Calculated: - Access level: 4
Data type: Unsigned8 Dynamic index: p0150 Func. diagram: -
P-Group: Data sets Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
0 199 0
To Next Page
Loading...
