PROFIdrive
Function Diagrams
2-1161
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Figure 2-53 2449 – A_DIGITAL interconnection
- 2449 -
Function diagram
87654321
fp_2449_01_eng.vsd
DO: CU_S
SINAMICS S
22.02.07 V02.05.00
PROFIdrive - A_DIGITAL interconnection
Signal targets for A_DIGITAL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
p0740[0] = r2091[2]
p0742[0] = r2091[4]
p0743[0] = r2091[5]
p0744[0] = r2091[6]
p0745[0] = r2091[7]
p0739[0] = r2091[1]
---
Inverted
[Function diagram]
signal target
[Function diagram]
internal status word
Interconnection
parameters
-
-
-
-
-
-
-
-
-
- -
p0738[0] = r2091[0]
-
p0741[0] = r2091[3]
A_DIGITAL.1
A_DIGITAL.2
A_DIGITAL.3
A_DIGITAL.4
A_DIGITAL.5
A_DIGITAL.6
A_DIGITAL.8
A_DIGITAL.9
A_DIGITAL.11
A_DIGITAL.12
A_DIGITAL.13
A_DIGITAL.14
A_DIGITAL.15
A_DIGITAL.7
A_DIGITAL.10
A_DIGITAL.0
Signal
Digital output 12 (DI/DO 12)
Digital output 15 (DI/DO 15)
Reserved
Reserved
Digital output 14 (DI/DO 14)
Digital output 13 (DI/DO 13)
Digital output 11 (DI/DO 11)
Digital output 10 (DI/DO 10)
Digital output 9 (DI/DO 9)
Reserved
Reserved
Reserved
Reserved
Reserved
Digital output 8 (DI/DO 8)
Meaning
Reserved
-
-
-
-
<3> Pre-assignment, can be freely changed.
<3>
<2>
<2>
<2>
<2>
<2>
<2>
<2>
<2>
<2> Can be set via p0728 as input (DI) or output (DO).<1> Used in telegrams 390, 391 and 392.
<1>
Refer to [1020.7]
PROFIdrive sampling time
To Next Page
Loading...
