Siemens SINAMICS S Series - r4959[0...n] OA application GUID; OA appl GUID; r4960[0...n] OA application GUID drive object; OA appl GUID DO; r7000 Par_circuit No. of active power units; Qty active PU

Parameters
List of parameters
1-886
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Displays the GUIDs of OA applications installed on the CompactFlash card.
r4959[0...15]: GUID of OA application 1
r4960[16]: Major information of OA application 1
r4960[17]: Minor information of OA application 1
r4959[18...33]: GUID of OA application 2
r4960[34]: Major information of OA application 2
r4960[35]: Minor information of OA application 2
etc.
Dependency: Refer to: r4950, r4951, r4952, r4955, p4956, r4957, r4958, r4960
Notice: If there is no OA application, then it is not possible to access an index.
Description: Displays the GUIDs of this drive object of the OA applications installed on the CompactFlash card.
r4960[0...15]: GUID of this drive object of OA application 1
r4960[16]: Major information of this drive object of OA application 1
r4960[17]: Minor information of this drive object of OA application 1
r4960[18...33]: GUID of this drive object of OA application 2
r4960[34]: Major information of this drive object of OA application 2
r4960[35]: Minor information of this drive object of OA application 2
etc.
Dependency: Refer to: r4950, r4951, r4952, r4955, p4956, r4957, r4958, r4959
Notice: If there is no OA application, then it is not possible to access an index.
Description: Displays the active power units for a parallel circuit configuration.
Dependency: Refer to: p7001
r4959[0...n] OA application GUID / OA appl GUID
All objects Can be changed: - Calculated: - Access level: 4
Data type: Unsigned8 Dynamic index: r4952 Func. diagram: -
P-Group: OEM range Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r4960[0...n] OA application GUID drive object / OA appl GUID DO
All objects Can be changed: - Calculated: - Access level: 4
Data type: Unsigned8 Dynamic index: r4952 Func. diagram: -
P-Group: OEM range Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r7000 Par_circuit No. of active power units / Qty active PU
A_INF (Parallel),
B_INF (Parallel),
S_INF (Parallel),
VECTOR (Parallel)
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned16 Dynamic index: - Func. diagram: -
P-Group: Modulation Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -