Siemens SINAMICS S Series - r4024 CO: TM15 DI;DO digital inputs 16... 23 status; TM15 D DI 16�23 St; r4025 CO: TM15 DI;DO digital inputs 16... 23 status inverted; TM15 D DI 16�23 inv; p4028 TM31 set input or output; TM31 DI or DO

Parameters
List of parameters
1-778
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Displays the status of digital inputs 16 ... 23 of terminal module 15 (TM15).
Dependency: Refer to: r4022, r4023, r4025
Note: DI: Digital input
Description: Displays the inverted status of digital inputs 16 ... 23 of terminal module 15 (TM15).
Dependency: Refer to: r4022, r4023, r4024
Note: DI: Digital input
Description: Sets the bidirectional digital inputs/outputs as input or output on the terminal module 31 (TM31).
r4024 CO: TM15DI/DO digital inputs 16 ... 23 status / TM15D DI 16-23 St
TM15DI_DO Can be changed: - Calculated: - Access level: 1
Data type: Unsigned16 Dynamic index: - Func. diagram: 9402
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI/DO 16 (X522.2) On Off -
01 DI/DO 17 (X522.3) On Off -
02 DI/DO 18 (X522.4) On Off -
03 DI/DO 19 (X522.5) On Off -
04 DI/DO 20 (X522.6) On Off -
05 DI/DO 21 (X522.7) On Off -
06 DI/DO 22 (X522.8) On Off -
07 DI/DO 23 (X522.9) On Off -
r4025 CO: TM15DI/DO digital inputs 16 ... 23 status inverted / TM15D DI 16-23 inv
TM15DI_DO Can be changed: - Calculated: - Access level: 1
Data type: Unsigned16 Dynamic index: - Func. diagram: 9402
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI/DO 16 (X522.2) On Off -
01 DI/DO 17 (X522.3) On Off -
02 DI/DO 18 (X522.4) On Off -
03 DI/DO 19 (X522.5) On Off -
04 DI/DO 20 (X522.6) On Off -
05 DI/DO 21 (X522.7) On Off -
06 DI/DO 22 (X522.8) On Off -
07 DI/DO 23 (X522.9) On Off -
p4028 TM31 set input or output / TM31 DI or DO
TM31 Can be changed: T Calculated: - Access level: 1
Data type: Unsigned32 Dynamic index: - Func. diagram: 1840, 9560,
9562
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 0000 bin