Siemens SINAMICS S Series - p8888[0...3] IF2 invert binector-connector converter status word; Bin;con ZSW inv; r8889[0...3] CO: IF2 send binector-connector converter status word; Bin;con ZSW send

To Next Page

To Previous Page

List of parameters

Parameters

1-969

SINAMICS S List Manual (LH1), 07/2007

Description: Setting to invert the individual binector inputs of the binector connector converter.

Index: [0] = Status word 1

[1] = Status word 2

[2] = Free status word 3

[3] = Free status word 4

Dependency: Refer to: p8880, p8881, p8882, p8883, r8889

Description: Connector output to interconnect the status words to a PZD send word.

Index: [0] = Status word 1

[1] = Status word 2

[2] = Free status word 3

[3] = Free status word 4

p8888[0...3] IF2 invert binector-connector converter status word / Bin/con ZSW inv

A_INF, B_INF,

SERVO, S_INF,

VECTOR

Can be changed: U, T Calculated: - Access level: 3

Data type: Unsigned16 Dynamic index: - Func. diagram: -

P-Group: Communications Units group: - Unit selection: -

Not for motor type: - Expert list: 1

Min Max Factory setting

- - 0000 bin

Bit field: Bit Signal name 1 signal 0 signal FP

00 Bit 0 Inverted Not inverted -

01 Bit 1 Inverted Not inverted -

02 Bit 2 Inverted Not inverted -

03 Bit 3 Inverted Not inverted -

04 Bit 4 Inverted Not inverted -

05 Bit 5 Inverted Not inverted -

06 Bit 6 Inverted Not inverted -

07 Bit 7 Inverted Not inverted -

08 Bit 8 Inverted Not inverted -

09 Bit 9 Inverted Not inverted -

10 Bit 10 Inverted Not inverted -

11 Bit 11 Inverted Not inverted -

12 Bit 12 Inverted Not inverted -

13 Bit 13 Inverted Not inverted -

14 Bit 14 Inverted Not inverted -

15 Bit 15 Inverted Not inverted -

r8889[0...3] CO: IF2 send binector-connector converter status word / Bin/con ZSW send

A_INF, B_INF,

SERVO, S_INF,

VECTOR

Can be changed: - Calculated: - Access level: 3

Data type: Unsigned16 Dynamic index: - Func. diagram: -

P-Group: Communications Units group: - Unit selection: -

Not for motor type: - Expert list: 1

Min Max Factory setting

- - -

Bit field: Bit Signal name 1 signal 0 signal FP

00 Bit 0 On Off -

01 Bit 1 On Off -

02 Bit 2 On Off -

03 Bit 3 On Off -

04 Bit 4 On Off -

05 Bit 5 On Off -

06 Bit 6 On Off -

07 Bit 7 On Off -

08 Bit 8 On Off -

09 Bit 9 On Off -

10 Bit 10 On Off -

11 Bit 11 On Off -

Main Page

Siemens SINAMICS S Series - p8888[0...3] IF2 invert binector-connector converter status word; Bin;con ZSW inv; r8889[0...3] CO: IF2 send binector-connector converter status word; Bin;con ZSW send

Table of Contents

Related product manuals