Siemens SINAMICS S Series - p4089 BI: TM15 DI;DO signal source for terminal DI;DO 19; TM15 D S_srcDI;DO19; p4090 BI: TM15 DI;DO signal source for terminal DI;DO 20; TM15 D S_srcDI;DO20; p4091 BI: TM15 DI;DO signal source for terminal DI;DO 21; TM15 D S_srcDI;DO21; p4092 BI: TM15 DI;DO signal source for terminal DI;DO 22; TM15 D S_srcDI;DO22

List of parameters
Parameters
1-813
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Sets the signal source for terminal DI/DO 19 (X522.5) of terminal module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.19 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 20 (X522.6) of terminal module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.20 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 21 (X522.7) of terminal module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.21 = 1).
DI/DO: Bidirectional Digital Input/Output
Description: Sets the signal source for terminal DI/DO 22 (X522.8) of terminal module 15 (TM15).
Note: Prerequisite: The DI/DO must be set as an output (p4028.22 = 1).
DI/DO: Bidirectional Digital Input/Output
p4089 BI: TM15DI/DO signal source for terminal DI/DO 19 / TM15D S_srcDI/DO19
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dynamic index: - Func. diagram: 9402
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 0
p4090 BI: TM15DI/DO signal source for terminal DI/DO 20 / TM15D S_srcDI/DO20
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dynamic index: - Func. diagram: 9402
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 0
p4091 BI: TM15DI/DO signal source for terminal DI/DO 21 / TM15D S_srcDI/DO21
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dynamic index: - Func. diagram: 9402
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 0
p4092 BI: TM15DI/DO signal source for terminal DI/DO 22 / TM15D S_srcDI/DO22
TM15DI_DO Can be changed: U, T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dynamic index: - Func. diagram: 9402
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 0