Siemens SINAMICS S Series - p4956[0...n] OA application activation; OA appl act; r4957[0...n] OA application version; OA appl version; r4958[0...n] OA application interface version; OA appl intfc_vers

List of parameters
Parameters
1-885
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Setting to activate the OA applications installed on the CompactFlash card.
r4956[0]: Activates OA application 1
r4956[1]: Activates OA application 2
etc.
Values: 0: OA application inactive
1: OA application active
Dependency: Refer to: r4950, r4951, r4952, r4955, r4957, r4958, r4959, r4960
Notice: If there is no OA application, then it is not possible to access an index.
Description: Displays the version of OA applications installed on the CompactFlash card.
r4957[0]: Version of OA application 1
r4957[1]: Version of OA application 2
etc.
Dependency: Refer to: r4950, r4951, r4952, r4955, p4956, r4958, r4959, r4960
Notice: If there is no OA application, then it is not possible to access an index.
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
Description: Displays the interface version of the OA applications installed on the CompactFlash card.
r4958[0]: Interface version of OA application 1
r4958[1]: Interface version of OA application 2
etc.
Dependency: Refer to: r4950, r4951, r4952, r4955, p4956, r4957, r4959, r4960
Notice: If there is no OA application, then it is not possible to access an index.
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
p4956[0...n] OA application activation / OA appl act
All objects Can be changed: C1, T Calculated: - Access level: 4
Data type: Integer16 Dynamic index: r4950 Func. diagram: -
P-Group: OEM range Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
0 1 0
r4957[0...n] OA application version / OA appl version
All objects Can be changed: - Calculated: - Access level: 4
Data type: Unsigned32 Dynamic index: r4950 Func. diagram: -
P-Group: OEM range Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r4958[0...n] OA application interface version / OA appl intfc_vers
All objects Can be changed: - Calculated: - Access level: 4
Data type: Unsigned32 Dynamic index: r4950 Func. diagram: -
P-Group: OEM range Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -