Siemens SINAMICS S Series - p4028 TM15 DI;DO set input or output; TM15 D DI or DO

To Next Page

To Previous Page

Parameters

List of parameters

1-780

SINAMICS S List Manual (LH1), 07/2007

Note: DI/DO: Bidirectional Digital Input/Output

Description: Sets the bidirectional digital inputs/outputs on the terminal module 15 (TM15) as input or output.

Bit field: Bit Signal name 1 signal 0 signal FP

00 DI/DO 0 (X520.2) Output Input -

01 DI/DO 1 (X520.3) Output Input -

02 DI/DO 2 (X520.4) Output Input -

03 DI/DO 3 (X520.5) Output Input -

04 DI/DO 4 (X520.6) Output Input -

05 DI/DO 5 (X520.7) Output Input -

06 DI/DO 6 (X520.8) Output Input -

07 DI/DO 7 (X520.9) Output Input -

08 DI/DO 8 (X521.2) Output Input -

09 DI/DO 9 (X521.3) Output Input -

10 DI/DO 10 (X521.4) Output Input -

11 DI/DO 11 (X521.5) Output Input -

12 DI/DO 12 (X521.6) Output Input -

13 DI/DO 13 (X521.7) Output Input -

14 DI/DO 14 (X521.8) Output Input -

15 DI/DO 15 (X521.9) Output Input -

16 DI/DO 16 (X522.2) Output Input -

17 DI/DO 17 (X522.3) Output Input -

18 DI/DO 18 (X522.4) Output Input -

19 DI/DO 19 (X522.5) Output Input -

20 DI/DO 20 (X522.6) Output Input -

21 DI/DO 21 (X522.7) Output Input -

22 DI/DO 22 (X522.8) Output Input -

23 DI/DO 23 (X522.9) Output Input -

p4028 TM15DI/DO set input or output / TM15D DI or DO

TM15DI_DO Can be changed: T Calculated: - Access level: 1

Data type: Unsigned32 Dynamic index: - Func. diagram: 9400, 9401,

9402

P-Group: Commands Units group: - Unit selection: -

Not for motor type: - Expert list: 1

Min Max Factory setting

- - 0000 bin