Parameters
List of parameters
1-990
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Sets the signal source (BO/CO parameter, BICO coded) to search in the signal drains.
The question is answered:
How often is a connection made to a signal source in the drive object and from which index are these interconnec-
tions saved (r9482[0...59], r9483[0...59])?
Dependency: Refer to: r9481, r9482, r9483, r9485, r9486
Description: Displays the number of BICO interconnections to the signal drain being searched for.
The signal source to be searched is set in p9484 (BICO-coded).
The search result is contained in r9482[0...59] and r9483[0...59] and is specified by the count (r9485) and the first
index (r9486).
Dependency: Refer to: r9481, r9482, r9483, p9484, r9486
Description: Displays the first index of the signal source being searched for.
The signal source to be searched is set in p9484 (BICO-coded).
The search result is contained in r9482[0...59] and r9483[0...59] and is specified by the count (r9485) and the first
index (r9486).
Dependency: Refer to: r9481, r9482, r9483, p9484, r9485
p9484 BICO interconnections search signal source / BICO S_src srch
A_INF, B_INF,
CU_CX32, CU_LINK,
CU_S, SERVO,
S_INF, TB30, TM15,
TM15DI_DO, TM17,
TM31, TM41,
TM54F_MA,
TM54F_SL, VEC-
TOR
Can be changed: T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
0 4294967295 0
r9485 BICO interconnections signal source search count / BICO S_src srchQty
A_INF, B_INF,
CU_CX32, CU_LINK,
CU_S, SERVO,
S_INF, TB30, TM15,
TM15DI_DO, TM17,
TM31, TM41,
TM54F_MA,
TM54F_SL, VEC-
TOR
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned16 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r9486 BICO interconnections signal source search first index / BICO S_src srchIdx
A_INF, B_INF,
CU_CX32, CU_LINK,
CU_S, SERVO,
S_INF, TB30, TM15,
TM15DI_DO, TM17,
TM31, TM41,
TM54F_MA,
TM54F_SL, VEC-
TOR
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned16 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
To Next Page
Loading...
