List of parameters
Parameters
1-841
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Is used to synchronize the timer of terminal module 17 (TM17) with the system time of the DP master.
Bit 12 ... 15:
After synchronization with the DP master, the module sends its sign-of-life in the form of a counter.
Bit 0:
This SYNC signal is set if the module has aligned its time to the system time of the DP master.
Bit 9:
This bit is set if a fault has occurred on the module (r0945).
Description: Is used to synchronize the timer of terminal module 15 (TM15) with the system time of the DP master.
Bit 12 ... 15:
After synchronization with the DP master, the module sends its sign-of-life in the form of a counter.
Bit 0:
This SYNC signal is set if the module has aligned its time to the system time of the DP master.
Bit 9:
This bit is set if a fault has occurred on the module (r0945).
Description: Displays status for digital input 0 ... 15 of terminal module 17 (TM17).
r4301 TM17 module synchronization / TM17 Module sync
TM17 Can be changed: - Calculated: - Access level: 3
Data type: Unsigned16 Dynamic index: - Func. diagram: -
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
r4301 TM15 module synchronization / TM15 module sync
TM15 Can be changed: - Calculated: - Access level: 3
Data type: Unsigned16 Dynamic index: - Func. diagram: -
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
r4304 TM17 status, digital input 0 ... 15 / TM17 St DI 0-15
TM17 Can be changed: - Calculated: - Access level: 3
Data type: Unsigned16 Dynamic index: - Func. diagram: -
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI/DO 0 (X520.2) On Off -
01 DI/DO 1 (X520.3) On Off -
02 DI/DO 2 (X520.5) On Off -
03 DI/DO 3 (X520.6) On Off -
04 DI/DO 4 (X520.8) On Off -
05 DI/DO 5 (X520.9) On Off -
06 DI/DO 6 (X521.2) On Off -
07 DI/DO 7 (X521.3) On Off -
08 DI/DO 8 (X521.8) On Off -
09 DI/DO 9 (X521.9) On Off -
10 DI/DO 10 (X522.2) On Off -
11 DI/DO 11 (X522.3) On Off -
12 DI/DO 12 (X522.5) On Off -
To Next Page
Loading...
