Siemens SINAMICS S Series - r4760[0...16383] Trace 0 trace buffer signal 0; Trace 0 trace sig0; r4761[0...16383] Trace 0 trace buffer signal 1; Trace 0 trace sig1; r4762[0...16383] Trace 0 trace buffer signal 2; Trace 0 trace sig2; r4763[0...16383] Trace 0 trace buffer signal 3; Trace 0 trace sig3

List of parameters
Parameters
1-873
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
r4760[0...16383] Trace 0 trace buffer signal 0 / Trace 0 trace sig0
CU_CX32, CU_S Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r4761[0...16383] Trace 0 trace buffer signal 1 / Trace 0 trace sig1
CU_CX32, CU_S Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r4762[0...16383] Trace 0 trace buffer signal 2 / Trace 0 trace sig2
CU_CX32, CU_S Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r4763[0...16383] Trace 0 trace buffer signal 3 / Trace 0 trace sig3
CU_CX32, CU_S Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r4764[0...16383] Trace 0 trace buffer signal 4 / Trace 0 rec sig 4
CU_CX32, CU_S Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r4765[0...16383] Trace 0 trace buffer signal 5 / Trace 0 rec sig 5
CU_CX32, CU_S Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -