Parameters
List of parameters
1-266
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Is used to assign the process data to be sent to the master (PZD, actual values).
p0916[0...35] TM17 PROFIdrive PZD actual value assignment / TM17 PD PZD actVal
TM17 Can be changed: T Calculated: - Access level: 2
Data type: Unsigned16 Dynamic index: - Func. diagram: -
P-Group: Communications Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
0 4365 [0] 4301
[1] 4304
[2] 4311
[3] 4312
[4] 0
[5] 0
[6] 0
[7] 0
[8] 0
[9] 0
[10] 0
[11] 0
[12] 0
[13] 0
[14] 0
[15] 0
[16] 0
[17] 0
[18] 0
[19] 0
[20] 0
[21] 0
[22] 0
[23] 0
[24] 0
[25] 0
[26] 0
[27] 0
[28] 0
[29] 0
[30] 0
[31] 0
[32] 0
[33] 0
[34] 0
[35] 0
To Next Page
Loading...
