Siemens SINAMICS S Series - p4730[0...1] Trace record signal 0; Trace record sig 0; p4731[0...1] Trace record signal 1; Trace record sig 1; p4732[0...1] Trace record signal 2; Trace record sig 2; p4733[0...1] Trace record signal 3; Trace record sig 3

List of parameters
Parameters
1-867
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Selects the first signal to be traced.
For trace with a physical address (p4780), the data type of the signal to be traced (recorded) is set here.
Index: [0] = Trace 0
[1] = Trace 1
Description: Selects the second signal to be traced.
For trace with a physical address (p4781), the data type of the signal to be traced (recorded) is set here.
Index: [0] = Trace 0
[1] = Trace 1
Description: Selects the third signal to be traced.
For trace with a physical address (p4782), the data type of the signal to be traced (recorded) is set here.
Index: [0] = Trace 0
[1] = Trace 1
Description: Selects the fourth signal to be traced.
For trace with a physical address (p4783), the data type of the signal to be traced (recorded) is set here.
Index: [0] = Trace 0
[1] = Trace 1
p4730[0...1] Trace record signal 0 / Trace record sig 0
CU_CX32, CU_S Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - 0
p4731[0...1] Trace record signal 1 / Trace record sig 1
CU_CX32, CU_S Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - 0
p4732[0...1] Trace record signal 2 / Trace record sig 2
CU_CX32, CU_S Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - 0
p4733[0...1] Trace record signal 3 / Trace record sig 3
CU_CX32, CU_S Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - 0