PROFIdrive
Function Diagrams
2-1171
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Figure 2-63 2459 – E_DIGITAL interconnection
- 2459 -
Function diagram
87654321
fp_2459_01_eng.vsd
DO: CU_S
SINAMICS S
22.02.07 V02.05.00
PROFIdrive - E_DIGITAL interconnection
Signal targets for E_DIGITAL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
--
Inverted
[Function diagram]
signal target
-
-
-
-
-
-
-
E_DIGITAL.1
E_DIGITAL.2
E_DIGITAL.3
E_DIGITAL.4
E_DIGITAL.5
E_DIGITAL.6
E_DIGITAL.8
E_DIGITAL.9
E_DIGITAL.11
E_DIGITAL.12
E_DIGITAL.13
E_DIGITAL.14
E_DIGITAL.15
E_DIGITAL.7
E_DIGITAL.10
E_DIGITAL.0
Signal
<3> Pre-assignment, can be freely changed.
Digital input 12 (DI/DO 12)
Digital input 15 (DI/DO 15)
Digital input 2 (DI 2)
Digital input 4 (DI 4)
Digital input 14 (DI/DO 14)
Digital input 13 (DI/DO 13)
Digital input 11 (DI/DO 11)
Digital input 10 (DI/DO 10)
Digital input 9 (DI/DO 9)
Digital input 1 (DI 1)
Digital input 3 (DI 3)
Digital input 5 (DI 5)
Digital input 6 (DI 6)
Digital input 7 (DI 7)
Digital input 8 (DI/DO 8)
Meaning
Digital input 0 (DI 0)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
[Function diagram]
Internal status word
-
<3>
Interconnection
parameters
p2082[0] = r0722[8]
p2082[3] = r0722[11]
p2082[5] = r0722[13]
p2082[6] = r0722[14]
p2082[7] = r0722[15]
p2082[8] = r0722[0]
p2082[2] = r0722[10]
p2082[4] = r0722[12]
p2082[1] = r0722[9]
p2082[9] = r0722[1]
p2082[11] = r0722[3]
p2082[13] = r0722[5]
p2082[14] = r0722[6]
p2082[15] = r0722[7]
p2082[10] = r0722[2]
p2082[12] = r0722[4]
<2>
<2>
<2>
<2>
<2>
<2>
<2>
<2>
<2> Can be set via p0728 as input (DI) or output (DO).<1> Used in telegrams 390, 391 and 392.
<1>
Refer to [1020.7]
PROFIdrive sampling time
To Next Page
Loading...
