Parameters
List of parameters
1-742
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Displays the velocities in filter branch 2.
Index: [0] = Filter 2.1 input value
[1] = Filter 2.2 output value
Description: Displays the speeds in filter branch 3.
Index: [0] = Filter 3.1 input value
[1] = Filter 3.2 output value
Description: Displays the velocities in filter branch 3.
Index: [0] = Filter 3.1 input value
[1] = Filter 3.2 output value
Description: Displays the speeds in filter branch 1.
Index: [0] = Filter 1.1 input value
[1] = Filter 1.1 output value
r3772[0...1] APC filter branch 2 display values / APC branch 2 val
SERVO (APC, Lin) Can be changed: - Calculated: - Access level: 3
Data type: Floating Point Dynamic index: - Func. diagram: 7012
P-Group: Setpoints Units group: 4_1 Unit selection: p0505
Not for motor type: - Expert list: 1
Min Max Factory setting
- [m/min] - [m/min] - [m/min]
r3773[0...1] APC filter branch 3 display values / APC branch 3 val
SERVO (APC) Can be changed: - Calculated: - Access level: 3
Data type: Floating Point Dynamic index: - Func. diagram: 7012
P-Group: Setpoints Units group: 3_1 Unit selection: p0505
Not for motor type: - Expert list: 1
Min Max Factory setting
- [RPM] - [RPM] - [RPM]
r3773[0...1] APC filter branch 3 display values / APC branch 3 val
SERVO (APC, Lin) Can be changed: - Calculated: - Access level: 3
Data type: Floating Point Dynamic index: - Func. diagram: 7012
P-Group: Setpoints Units group: 4_1 Unit selection: p0505
Not for motor type: - Expert list: 1
Min Max Factory setting
- [m/min] - [m/min] - [m/min]
r3777[0...1] CO: APC filter branch 1 display values / APC branch 1 val
SERVO (APC) Can be changed: - Calculated: - Access level: 3
Data type: Floating Point Dynamic index: - Func. diagram: 7012
P-Group: Setpoints Units group: 3_1 Unit selection: p0505
Not for motor type: - Expert list: 1
Min Max Factory setting
- [RPM] - [RPM] - [RPM]
To Next Page
Loading...
