Siemens SINAMICS S Series - r7316[0...n] CO: Par_circuit VSM 10 V input 2 actual value; VSM inp 2 V_act; r7320[0...n] Par_circuit VSM line filter capacitance phase U; VSM filt C phase U; r7321[0...n] Par_circuit VSM line filter capacitance phase V; VSM filt C phase V; r7322[0...n] Par_circuit VSM line filter capacitance phase W; VSM filt C phase W

List of parameters
Parameters
1-905
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Displays the actual value of the voltage measured at the 10 V input 2 of the Voltage Sensing Modules (VSM).
The average value of all VSM is displayed in r3674.
Dependency: Refer to: p3670
Note: 10 V input 2: Terminals X520.3 and X520.4
Description: Displays the capacitance of the line filter, phase U of the particular Voltage Sensing Module (VSM).
The average value of all VSM is displayed in r3677[0].
Dependency: Refer to: p3676
Note: Prerequisites:
The monitoring of the filter capacitance is activated.
Description: Displays the capacitance of the line filter, phase V of the particular Voltage Sensing Module (VSM).
The average value of all VSM is displayed in r3677[1].
Dependency: Refer to: p3676
Note: Prerequisites:
The monitoring of the filter capacitance is activated.
Description: Displays the capacitance of the line filter, phase W of the particular Voltage Sensing Module (VSM).
The average value of all VSM is displayed in r3677[2].
Dependency: Refer to: p3676
Note: Prerequisites:
The monitoring of the filter capacitance is activated.
r7316[0...n] CO: Par_circuit VSM 10 V input 2 actual value / VSM inp 2 V_act
A_INF (Parallel),
S_INF (Parallel)
Can be changed: - Calculated: - Access level: 3
Data type: Floating Point Dynamic index: p0140 Func. diagram: -
P-Group: Closed-loop control Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- [V] - [V] - [V]
r7320[0...n] Par_circuit VSM line filter capacitance phase U / VSM filt C phase U
A_INF (Parallel),
S_INF (Parallel)
Can be changed: - Calculated: - Access level: 4
Data type: Floating Point Dynamic index: p0140 Func. diagram: -
P-Group: Closed-loop control Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- [µF] - [µF] - [µF]
r7321[0...n] Par_circuit VSM line filter capacitance phase V / VSM filt C phase V
A_INF (Parallel),
S_INF (Parallel)
Can be changed: - Calculated: - Access level: 4
Data type: Floating Point Dynamic index: p0140 Func. diagram: -
P-Group: Closed-loop control Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- [µF] - [µF] - [µF]
r7322[0...n] Par_circuit VSM line filter capacitance phase W / VSM filt C phase W
A_INF (Parallel),
S_INF (Parallel)
Can be changed: - Calculated: - Access level: 4
Data type: Floating Point Dynamic index: p0140 Func. diagram: -
P-Group: Closed-loop control Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- [µF] - [µF] - [µF]