Siemens SINAMICS S Series - p4096 TM41 digital inputs, simulation mode setpoint; TM41 DI sim setp; p4096 TM15 DI;DO digital inputs, simulation mode, setpoint; TM15 D DI sim setp

Parameters
List of parameters
1-818
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Sets the setpoint for the input signals in the simulation mode of the digital inputs of terminal module 41 (TM41).
Dependency: The simulation of a digital input is selected using p4095.
Refer to: p4095
Note: This parameter is not saved when data is backed-up (p0971, p0977).
DI: Digital input
DI/DO: Bidirectional Digital Input/Output
Description: Sets the setpoint for the input signals in the simulation mode of the digital inputs of terminal module 15 (TM15).
p4096 TM41 digital inputs, simulation mode setpoint / TM41 DI sim setp
TM41 Can be changed: U, T Calculated: - Access level: 2
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Terminals Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 0000 bin
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI 0 (X522.1) High Low 9660
01 DI 1 (X522.2) High Low 9660
02 DI 2 (X522.3) High Low 9660
03 DI 3 (X522.4) High Low 9660
08 DI/DO 0 (X521.1) High Low 9661
09 DI/DO 1 (X521.2) High Low 9661
10 DI/DO 2 (X521.3) High Low 9662
11 DI/DO 3 (X521.4) High Low 9662
p4096 TM15DI/DO digital inputs, simulation mode, setpoint / TM15D DI sim setp
TM15DI_DO Can be changed: U, T Calculated: - Access level: 2
Data type: Unsigned32 Dynamic index: - Func. diagram: 9400, 9401,
9402
P-Group: Terminals Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 0000 bin
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI/DO 0 (X520.2) High Low -
01 DI/DO 1 (X520.3) High Low -
02 DI/DO 2 (X520.4) High Low -
03 DI/DO 3 (X520.5) High Low -
04 DI/DO 4 (X520.6) High Low -
05 DI/DO 5 (X520.7) High Low -
06 DI/DO 6 (X520.8) High Low -
07 DI/DO 7 (X520.9) High Low -
08 DI/DO 8 (X521.2) High Low -
09 DI/DO 9 (X521.3) High Low -
10 DI/DO 10 (X521.4) High Low -
11 DI/DO 11 (X521.5) High Low -
12 DI/DO 12 (X521.6) High Low -
13 DI/DO 13 (X521.7) High Low -
14 DI/DO 14 (X521.8) High Low -
15 DI/DO 15 (X521.9) High Low -
16 DI/DO 16 (X522.2) High Low -
17 DI/DO 17 (X522.3) High Low -
18 DI/DO 18 (X522.4) High Low -
19 DI/DO 19 (X522.5) High Low -
20 DI/DO 20 (X522.6) High Low -