Siemens SINAMICS S Series - Figure 2-37 2211 - Data transfer

Function Diagrams CU_LINK 2-1142
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Figure 2-37 2211 – Data transfer
- 2211 -
Function diagram
87654321
fp_2211_51_eng.vsd
DO: CU_LINK, CU_CX32
SINAMICS
01.12.06 V02.05.00
CU_LINK - Data transfer
CU_LINK (master) CU_CX32 (slave)
Digital inputs 0 … 15
Digital inputs 0 … 7
DRIVE-CLiQ
<1> The drive object CU_LINK only exists for automation systems with integrated
SINAMICS functionality (e.g. SIMOTION D, SINUMERIK NCU) and the corresponding
expansion components (e.g. CX32, NX10).
The master functionality is available on the automation system, the slave functionality is
available on the expansion components.
p8500[0]
p8500[7]
r8510.7
r8510.0
<1>
p8501[0]
p8501[15]
r8511.15
r8511.0
r8510.0
r8510.7
p8500[0]
p8500[7]
r8511.0
r8511.15
p8501[0]
p8501[15]
r8512
r8515
r8514
r8513
p8505
p8504
Signal value 3
Signal value 2
Signal value 1
Signal value 0
p8503
p8502
p8502
p8504
p8505
r8515
r8514
r8512
p8503
r8513
p8520[0]
p8520[1]
p8520[2]
p8520[3]
p8520[3]
p8520[2]
p8520[1]
p8520[0]