Siemens SINAMICS S Series - p4093 BI: TM15 DI;DO signal source for terminal DI;DO 23; TM15 D S_srcDI;DO23; r4094.0...23 BO: TM15 digital inputs status inverted raw data internal; TM15 DI st raw dat

To Next Page

To Previous Page

Parameters

List of parameters

1-814

SINAMICS S List Manual (LH1), 07/2007

Description: Sets the signal source for terminal DI/DO 23 (X522.9) of terminal module 15 (TM15).

Note: Prerequisite: The DI/DO must be set as an output (p4028.23 = 1).

DI/DO: Bidirectional Digital Input/Output

Description: Displays the inverted status of the raw data of the digital inputs of the Terminal Module 15 (TM15).

Notice: The raw data of the digital inputs is directly displayed (e.g. without any debounce).

Note: Should only used for internal Siemens purposes (alternative r4022, r4023).

p4093 BI: TM15DI/DO signal source for terminal DI/DO 23 / TM15D S_srcDI/DO23

TM15DI_DO Can be changed: U, T Calculated: - Access level: 1

Data type: Unsigned32 / Binary Dynamic index: - Func. diagram: 9402

P-Group: Commands Units group: - Unit selection: -

Not for motor type: - Expert list: 1

Min Max Factory setting

- - 0

r4094.0...23 BO: TM15 digital inputs status inverted raw data internal / TM15 DI st raw dat

TM15DI_DO Can be changed: - Calculated: - Access level: 4

Data type: Unsigned32 Dynamic index: - Func. diagram: -

P-Group: Commands Units group: - Unit selection: -

Not for motor type: - Expert list: 1

Min Max Factory setting

- - -

Bit field: Bit Signal name 1 signal 0 signal FP

00 DI/DO 0 (X520.2) High Low -

01 DI/DO 1 (X520.3) High Low -

02 DI/DO 2 (X520.4) High Low -

03 DI/DO 3 (X520.5) High Low -

04 DI/DO 4 (X520.6) High Low -

05 DI/DO 5 (X520.7) High Low -

06 DI/DO 6 (X520.8) High Low -

07 DI/DO 7 (X520.9) High Low -

08 DI/DO 8 (X521.2) High Low -

09 DI/DO 9 (X521.3) High Low -

10 DI/DO 10 (X521.4) High Low -

11 DI/DO 11 (X521.5) High Low -

12 DI/DO 12 (X521.6) High Low -

13 DI/DO 13 (X521.7) High Low -

14 DI/DO 14 (X521.8) High Low -

15 DI/DO 15 (X521.9) High Low -

16 DI/DO 16 (X522.2) High Low -

17 DI/DO 17 (X522.3) High Low -

18 DI/DO 18 (X522.4) High Low -

19 DI/DO 19 (X522.5) High Low -

20 DI/DO 20 (X522.6) High Low -

21 DI/DO 21 (X522.7) High Low -

22 DI/DO 22 (X522.8) High Low -

23 DI/DO 23 (X522.9) High Low -

Main Page

Siemens SINAMICS S Series - p4093 BI: TM15 DI;DO signal source for terminal DI;DO 23; TM15 D S_srcDI;DO23; r4094.0...23 BO: TM15 digital inputs status inverted raw data internal; TM15 DI st raw dat

Table of Contents

Related product manuals