Siemens SINAMICS S Series - p4048 TM41 invert digital outputs; TM41 DO invert; p4048 TM17 invert digital inputs;outputs; TM17 DI;DO invert

To Next Page

To Previous Page

List of parameters

Parameters

1-791

SINAMICS S List Manual (LH1), 07/2007

Note: DO: Digital Output

DI/DO: Bidirectional Digital Input/Output

Description: Setting to invert the signals at the digital outputs of terminal module 41 (TM41).

Note: DO: Digital Output

DI/DO: Bidirectional Digital Input/Output

Description: Setting to invert the signals at the digital inputs/outputs of terminal module 17 (TM17).

Note: DI/DO: Bidirectional Digital Input/Output

Bit field: Bit Signal name 1 signal 0 signal FP

00 DO 0 (X542.1 - 3) Inverted Not inverted -

01 DO 1 (X542.4 - 6) Inverted Not inverted -

08 DI/DO 8 (X541.2) Inverted Not inverted -

09 DI/DO 9 (X541.3) Inverted Not inverted -

10 DI/DO 10 (X541.4) Inverted Not inverted -

11 DI/DO 11 (X541.5) Inverted Not inverted -

p4048 TM41 invert digital outputs / TM41 DO invert

TM41 Can be changed: U, T Calculated: - Access level: 1

Data type: Unsigned32 Dynamic index: - Func. diagram: -

P-Group: Commands Units group: - Unit selection: -

Not for motor type: - Expert list: 1

Min Max Factory setting

- - 0000 bin

Bit field: Bit Signal name 1 signal 0 signal FP

08 DI/DO 0 (X521.1) Inverted Not inverted 9661

09 DI/DO 1 (X521.2) Inverted Not inverted 9661

10 DI/DO 2 (X521.3) Inverted Not inverted 9662

11 DI/DO 3 (X521.4) Inverted Not inverted 9662

p4048 TM17 invert digital inputs/outputs / TM17 DI/DO invert

TM17 Can be changed: U, T Calculated: - Access level: 2

Data type: Unsigned32 Dynamic index: - Func. diagram: -

P-Group: Commands Units group: - Unit selection: -

Not for motor type: - Expert list: 1

Min Max Factory setting

- - 0000 bin

Bit field: Bit Signal name 1 signal 0 signal FP

00 DI/DO 0 (X520.2) Inverted Not inverted -

01 DI/DO 1 (X520.3) Inverted Not inverted -

02 DI/DO 2 (X520.5) Inverted Not inverted -

03 DI/DO 3 (X520.6) Inverted Not inverted -

04 DI/DO 4 (X520.8) Inverted Not inverted -

05 DI/DO 5 (X520.9) Inverted Not inverted -

06 DI/DO 6 (X521.2) Inverted Not inverted -

07 DI/DO 7 (X521.3) Inverted Not inverted -

08 DI/DO 8 (X521.8) Inverted Not inverted -

09 DI/DO 9 (X521.9) Inverted Not inverted -

10 DI/DO 10 (X522.2) Inverted Not inverted -

11 DI/DO 11 (X522.3) Inverted Not inverted -

12 DI/DO 12 (X522.5) Inverted Not inverted -

13 DI/DO 13 (X522.6) Inverted Not inverted -

14 DI/DO 14 (X522.8) Inverted Not inverted -

15 DI/DO 15 (X522.9) Inverted Not inverted -

Main Page

Siemens SINAMICS S Series - p4048 TM41 invert digital outputs; TM41 DO invert; p4048 TM17 invert digital inputs;outputs; TM17 DI;DO invert

Table of Contents

Related product manuals