Parameters
List of parameters
1-928
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Displays the signals of the wordwise received data (process signal).
This signal value is interconnected and transferred to another Control Unit via CI: p8504.
Dependency: Refer to: p8504
Description: Displays the signals of the wordwise received data (process signal).
This signal value is interconnected and transferred to another Control Unit via CI: p8505.
Dependency: Refer to: p8505
Description: Sets the scaling for signal value 0 ... 3 (process signals).
Index: [0] = Signal value 0 (CI: p8502) scaling
[1] = Signal value 1 (CI: p8503) scaling
[2] = Signal value 2 (CI: p8504) scaling
[3] = Signal value 3 (CI: p8505) scaling
Dependency: Refer to: p8502, p8503, p8504, p8505
Description: Is used to save the current configuration of the Advanced Operator Panels (AOP).
r8514 CO: Data transfer 2 receive wordwise / Trans 2 recv word
CU_CX32, CU_LINK Can be changed: - Calculated: - Access level: 2
Data type: Floating Point Dynamic index: - Func. diagram: 2211
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
r8515 CO: Data transfer 3 receive wordwise / Trans 3 recv word
CU_CX32, CU_LINK Can be changed: - Calculated: - Access level: 2
Data type: Floating Point Dynamic index: - Func. diagram: 2211
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
p8520[0...3] CU_LINK signal value scaling / Sig val scal
CU_CX32, CU_LINK Can be changed: U, T Calculated: - Access level: 2
Data type: Floating Point Dynamic index: - Func. diagram: 2211
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
0.00010 10000.00000 1.00000
p8550 AOP LOCAL/REMOTE / AOP LOCAL/REMOTE
CU_CX32, CU_S Can be changed: U, T Calculated: - Access level: 4
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 1001 bin
Bit field: Bit Signal name 1 signal 0 signal FP
00 LOCAL save Yes No -
01 Start in LOCAL Yes No -
02 Change in oper. Yes No -
03 OFF acts like OFF1 Yes No -
04 OFF acts like OFF2 Yes No -
05 OFF acts like OFF3 Yes No -
To Next Page
Loading...
