Siemens SINAMICS S Series - p4066[0...0] TM41 analog input, activate absolute value generation; TM41 AI absVal act; p4067[0...1] BI: TB30 analog inputs, signal source for inversion; TB30 AI invert; p4067[0...1] BI: TM31 analog inputs, signal source for inversion; TM31 AI invert; p4067[0...0] BI: TM41 analog input, signal source for inversion; TM41 AI invert

List of parameters
Parameters
1-803
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Activates the absolute value generation of the analog input signal of terminal module 41 (TM41).
Values: 0: No absolute value generation
1: Absolute value generation switched-in
Index: [0] = AI 0 (X523.1/X523.2)
Description: Sets the signal source to invert the analog input signals of the Terminal Board 30 (TB30).
Index: [0] = AI 0 (X482.1/X482.2)
[1] = AI 1 (X482.3/X482.4)
Description: Sets the signal source to invert the analog inputs signals of terminal module 31 (TM31).
Index: [0] = AI 0 (X521.1/X521.2, S5.0)
[1] = AI 1 (X521.3/X521.4, S5.1)
Description: Sets the signal source to invert the analog input signal of terminal module 41 (TM41).
Index: [0] = AI 0 (X523.1/X523.2)
p4066[0...0] TM41 analog input, activate absolute value generation / TM41 AI absVal act
TM41 Can be changed: U, T Calculated: - Access level: 3
Data type: Integer16 Dynamic index: - Func. diagram: 9663
P-Group: Terminals Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
0 1 0
p4067[0...1] BI: TB30 analog inputs, signal source for inversion / TB30 AI invert
TB30 Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 / Binary Dynamic index: - Func. diagram: 9104
P-Group: Terminals Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 0
p4067[0...1] BI: TM31 analog inputs, signal source for inversion / TM31 AI invert
TM31 Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 / Binary Dynamic index: - Func. diagram: 9566, 9568
P-Group: Terminals Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 0
p4067[0...0] BI: TM41 analog input, signal source for inversion / TM41 AI invert
TM41 Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 / Binary Dynamic index: - Func. diagram: 9663
P-Group: Terminals Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 0