Parameters
List of parameters
1-776
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Notice: For the BICO interconnection of the connector output (CO) only bit 00 ... bit 15 are transferred.
Note: DI/DO: Bidirectional Digital Input/Output
Description: Displays the inverted status of the digital inputs of the Terminal Board 30 (TB30).
Dependency: Refer to: r4022
Note: DI: Digital input
Description: Displays the inverted status of the digital inputs of terminal module 31 (TM31).
Dependency: Refer to: r4022
Note: DI: Digital input
DI/DO: Bidirectional Digital Input/Output
Description: Displays the inverted status of the digital inputs of terminal module 41 (TM41).
r4023.0...3 BO: TB30 digital inputs, status inverted / TB30 DI status inv
TB30 Can be changed: - Calculated: - Access level: 1
Data type: Unsigned32 Dynamic index: - Func. diagram: 1790, 9100
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI 0 (X481.1) High Low -
01 DI 1 (X481.2) High Low -
02 DI 2 (X481.3) High Low -
03 DI 3 (X481.4) High Low -
r4023.0...11 CO/BO: TM31 digital inputs, status inverted / TM31 DI status inv
TM31 Can be changed: - Calculated: - Access level: 1
Data type: Unsigned32 Dynamic index: - Func. diagram: 1840, 9550,
9552, 9560, 9562
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 DI 0 (X520.1) High Low -
01 DI 1 (X520.2) High Low -
02 DI 2 (X520.3) High Low -
03 DI 3 (X520.4) High Low -
04 DI 4 (X530.1) High Low -
05 DI 5 (X530.2) High Low -
06 DI 6 (X530.3) High Low -
07 DI 7 (X530.4) High Low -
08 DI/DO 8 (X541.2) High Low -
09 DI/DO 9 (X541.3) High Low -
10 DI/DO 10 (X541.4) High Low -
11 DI/DO 11 (X541.5) High Low -
r4023.0...11 BO: TM41 digital inputs, status inverted / TM41 DI status inv
TM41 Can be changed: - Calculated: - Access level: 1
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Commands Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
To Next Page
Loading...
