Parameters
List of parameters
1-88
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Note: A "function module" is a functional expansion of a drive object that can be activated when commissioning.
Description: The function module of an existing drive object is entered into each index.
Index: [0] = Function module Control Unit
[1] = Function module object 1
[2] = Function module object 2
[3] = Function module object 3
[4] = Function module object 4
[5] = Function module object 5
[6] = Function module object 6
[7] = Function module object 7
[8] = Function module object 8
[9] = Function module object 9
[10] = Function module object 10
[11] = Function module object 11
[12] = Function module object 12
[13] = Function module object 13
[14] = Function module object 14
[15] = Function module object 15
Note: A "function module" is a functional expansion of a drive object that can be activated when commissioning.
Description: Displays the activated function module for the particular drive object.
Note: A "function module" is a functional expansion of a drive object that can be activated when commissioning.
Bit field: Bit Signal name 1 signal 0 signal FP
18 Free function blocks Activated Not activated -
29 CAN Activated Not activated -
30 COMM BOARD Activated Not activated -
31 PROFINET Activated Not activated -
p0108[0...15] Drive object, function module / DO function module
CU_CX32 Can be changed: C1(2) Calculated: - Access level: 2
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - 0000 bin
Bit field: Bit Signal name 1 signal 0 signal FP
18 Free function blocks Activated Not activated -
r0108 Drive object, function module / DO function module
A_INF Can be changed: - Calculated: - Access level: 2
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Closed-loop control Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
15 Parallel cct. config. Activated Not activated -
18 Free function blocks Activated Not activated -
19 Master/Slave Activated Not activated -
26 Braking Module external Activated Not activated -
28 Cooling system Activated Not activated -
31 PROFINET Activated Not activated -
To Next Page
Loading...
