Siemens SINAMICS S Series - Figure 2-178 6491 - Flux control configuration

Vector control
Function Diagrams
2-1297
© Siemens AG 2007 All Rights Reserved SINAMICS S List Manual (LH1), 07/2007
Figure 2-178 6491 – Flux control configuration
- 6491 -
Function diagram
87654321
DO: VECTOR
SINAMICS S
22.07.05 V02.05.00
Vector control - Flux control configuration
1
2
1 = Flux setpoint, soft starting active
Meaning
1 = Flux setpoint, differentiation active
1 = Flux build-up control active
0
Bit No.
Flux control, configuration
[6723.6]
[6722.3]
p1401[D]
p1401[D]
F_ctrl config
[6723.7]1
1
0
Factory setting
3 Reserved
4 Reserved
Reserved5
6
7 Reserved
3 Reserved8
Reserved9
10 Reserved
11 Reserved
12 Reserved
Reserved
13 Reserved
14 Reserved
15 Reserved
Refer to [1020.7]
p0115[y] (Motor Modules)
fp_6491_01_eng.vsd