Siemens SINAMICS S Series - r8570[0...29] Macro drive unit; Macro drv unit; r8570[0...29] Macro drive object; Macro DO; r8571[0...29] Macro Binector Input (BI); Macro BI; r8572[0...29] Macro Connector Inputs (CI) for speed setpoints; Macro CI n_set

List of parameters
Parameters
1-929
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Displays the ACX file saved in the appropriate directory of the CompactFlash card.
Dependency: Refer to: p0015
Note: For a value = 9999999, the following applies: The read operation is still running.
Description: Displays the ACX file saved in the appropriate directory of the CompactFlash card.
Dependency: Refer to: p0015
Note: For a value = 9999999, the following applies: The read operation is still running.
Description: Displays the ACX file saved in the appropriate directory of the CompactFlash card.
Dependency: Refer to: p0700
Note: For a value = 9999999, the following applies: The read operation is still running.
Description: Displays the ACX file saved in the appropriate directory of the CompactFlash card.
Dependency: Refer to: p1000
Note: For a value = 9999999, the following applies: The read operation is still running.
07 CW/CCW active Yes No -
08 Jog active Yes No -
09 Save speed setpoint Yes No -
14 Inhibit operation Yes No -
15 Inhibit parameters Yes No -
r8570[0...29] Macro drive unit / Macro drv unit
CU_CX32, CU_S Can be changed: - Calculated: - Access level: 1
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r8570[0...29] Macro drive object / Macro DO
A_INF, B_INF,
SERVO, S_INF,
TM15DI_DO, TM31,
VECTOR
Can be changed: - Calculated: - Access level: 1
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r8571[0...29] Macro Binector Input (BI) / Macro BI
A_INF, B_INF,
SERVO, S_INF,
VECTOR
Can be changed: - Calculated: - Access level: 1
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -
r8572[0...29] Macro Connector Inputs (CI) for speed setpoints / Macro CI n_set
A_INF, B_INF,
SERVO, S_INF,
VECTOR
Can be changed: - Calculated: - Access level: 1
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 0
Min Max Factory setting
- - -