Siemens SINAMICS S Series - r1969 High load inertia identified; High load inert id; r1969 Speed_ctrl_opt moment of inertia determined; n_opt M_inert det; r1970[0...1] Speed_ctrl_opt vibration test vibration frequency determined; n_opt f_vibration; r1971[0...1] Speed_ctrl_opt vibration test standard deviation determined; n_opt std. deviat.

Parameters
List of parameters
1-516
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Displays the identified high load inertia.
Dependency: Refer to: p0341, p0342, p1498, p1959, p1960
Description: Displays the determined moment of inertia of the drive.
After it has been determined, the value is transferred to p0341, p0342.
Dependency: Refer to: p0341, p0342, p1959
Refer to: F07984
Description: Displays the vibration frequencies determined by the vibration test.
Index: [0] = Frequency low
[1] = Frequency high
Dependency: Refer to: p1959
Refer to: F07985
Description: Displays the standard deviations of the vibration frequencies determined by the vibration test
Index: [0] = Standard deviation of low frequency
[1] = Standard deviation of high frequency
Dependency: Refer to: p1959
Refer to: F07985
r1969 High load inertia identified / High load inert id
SERVO (Lin) Can be changed: - Calculated: - Access level: 3
Data type: Floating Point Dynamic index: - Func. diagram: -
P-Group: Motor identification Units group: 27_1 Unit selection: p0100
Not for motor type: REL Expert list: 1
Min Max Factory setting
- [kg] - [kg] - [kg]
r1969 Speed_ctrl_opt moment of inertia determined / n_opt M_inert det
VECTOR (n/M) Can be changed: - Calculated: - Access level: 4
Data type: Floating Point Dynamic index: - Func. diagram: -
P-Group: Motor identification Units group: 25_1 Unit selection: p0100
Not for motor type: PEM, REL Expert list: 1
Min Max Factory setting
- [kgm²] - [kgm²] - [kgm²]
r1970[0...1] Speed_ctrl_opt vibration test vibration frequency determined / n_opt f_vibration
VECTOR (n/M) Can be changed: - Calculated: - Access level: 4
Data type: Floating Point Dynamic index: - Func. diagram: -
P-Group: Motor identification Units group: - Unit selection: -
Not for motor type: PEM, REL Expert list: 1
Min Max Factory setting
- [Hz] - [Hz] - [Hz]
r1971[0...1] Speed_ctrl_opt vibration test standard deviation determined / n_opt std. deviat.
VECTOR (n/M) Can be changed: - Calculated: - Access level: 4
Data type: Floating Point Dynamic index: - Func. diagram: -
P-Group: Motor identification Units group: - Unit selection: -
Not for motor type: PEM, REL Expert list: 1
Min Max Factory setting
- [Hz] - [Hz] - [Hz]