Siemens SINAMICS S Series - r7833[0...15] Telegram diagnostics unsigned; Tel diag unsigned; r7834[0...15] Telegram diagnostics signed; Tel diag signed

List of parameters
Parameters
1-911
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
[11] =
[12] =
[13] =
[14] =
[15] =
Description: Parameter to display a DSA signal in the unsigned-integer format.
The associated signal number is represented at the appropriate index in r7831.
Index: [0] =
[1] =
[2] =
[3] =
[4] =
[5] =
[6] =
[7] =
[8] =
[9] =
[10] =
[11] =
[12] =
[13] =
[14] =
[15] =
Description: Parameter to display a DSA signal in the signed-integer format.
The associated signal number is represented at the appropriate index in r7831.
Index: [0] =
[1] =
[2] =
[3] =
[4] =
[5] =
[6] =
[7] =
[8] =
[9] =
[10] =
[11] =
[12] =
[13] =
[14] =
[15] =
r7833[0...15] Telegram diagnostics unsigned / Tel diag unsigned
SERVO, VECTOR Can be changed: - Calculated: - Access level: 4
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -
r7834[0...15] Telegram diagnostics signed / Tel diag signed
SERVO, VECTOR Can be changed: - Calculated: - Access level: 4
Data type: Integer32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Expert list: 1
Min Max Factory setting
- - -