List of parameters
Parameters
1-741
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description: Displays the load speed for APC (Advanced Positioning Control).
Dependency: Refer to: r3771
Description: Displays the load velocity for APC (Advanced Positioning Control).
Dependency: Refer to: r3771
Description: Displays the smoothed load speed for APC (Advanced Positioning Control).
Dependency: Refer to: p1441, r3770
Description: Displays the smoothed load velocity for APC (Advanced Positioning Control).
Dependency: Refer to: p1441, r3770
Description: Displays the speeds in filter branch 2.
Index: [0] = Filter 2.1 input value
[1] = Filter 2.2 output value
r3770 CO: APC load speed / APC n_load
SERVO (APC) Can be changed: - Calculated: - Access level: 3
Data type: Floating Point Dynamic index: - Func. diagram: 7012
P-Group: Setpoints Units group: 3_1 Unit selection: p0505
Not for motor type: - Expert list: 1
Min Max Factory setting
- [RPM] - [RPM] - [RPM]
r3770 CO: APC load velocity / APC v_load
SERVO (APC, Lin) Can be changed: - Calculated: - Access level: 3
Data type: Floating Point Dynamic index: - Func. diagram: 7012
P-Group: Setpoints Units group: 4_1 Unit selection: p0505
Not for motor type: - Expert list: 1
Min Max Factory setting
- [m/min] - [m/min] - [m/min]
r3771 CO: APC load speed smoothed / APC n_load smth
SERVO (APC) Can be changed: - Calculated: - Access level: 3
Data type: Floating Point Dynamic index: - Func. diagram: 7012
P-Group: Setpoints Units group: 3_1 Unit selection: p0505
Not for motor type: - Expert list: 1
Min Max Factory setting
- [RPM] - [RPM] - [RPM]
r3771 CO: APC load velocity smoothed / APC v_load smth
SERVO (APC, Lin) Can be changed: - Calculated: - Access level: 3
Data type: Floating Point Dynamic index: - Func. diagram: 7012
P-Group: Setpoints Units group: 4_1 Unit selection: p0505
Not for motor type: - Expert list: 1
Min Max Factory setting
- [m/min] - [m/min] - [m/min]
r3772[0...1] APC filter branch 2 display values / APC branch 2 val
SERVO (APC) Can be changed: - Calculated: - Access level: 3
Data type: Floating Point Dynamic index: - Func. diagram: 7012
P-Group: Setpoints Units group: 3_1 Unit selection: p0505
Not for motor type: - Expert list: 1
Min Max Factory setting
- [RPM] - [RPM] - [RPM]
To Next Page
Loading...
