Texas Instruments AM335 Series

Touchscreen Controller Registers www.ti.com
Table 12-9. IRQENABLE_SET Register Field Descriptions (continued)
Bit Field Type Reset Description
2 FIFO0_Threshold R/W 0h Write 0 = No action.
Read 0 = Interrupt disabled (masked).
Read 1 = Interrupt enabled.
Write 1 = Enable interrupt.
1 End_of_Sequence R/W 0h Write 0 = No action.
Read 0 = Interrupt disabled (masked).
Read 1 = Interrupt enabled.
Write 1 = Enable interrupt.
0 HW_Pen_Event_asynchro R/W 0h Write 0 = No action.
nous Read 0 = Interrupt disabled (masked).
Read 1 = Interrupt enabled.
Write 1 = Enable interrupt.
1042
Touchscreen Controller SPRUH73H–October 2011–Revised April 2013
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated