www.ti.com
GPIO Registers
25.4.1.11 GPIO_IRQSTATUS_CLR_1 Register (offset = 40h) [reset = 0h]
GPIO_IRQSTATUS_CLR_1 is shown in Figure 25-17 and described in Table 25-16.
All 1-bit fields in the GPIO_IRQSTATUS_CLR_1 register clear a specific interrupt event. Writing a 1 to a
bit disables the interrupt field. Writing a 0 has no effect, that is, the register value is not modified.
Figure 25-17. GPIO_IRQSTATUS_CLR_1 Register
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INTLINE[n]
R/W-0h
LEGEND: R/W = Read/Write; R = Read only; W1toCl = Write 1 to clear bit; -n = value after reset
Table 25-16. GPIO_IRQSTATUS_CLR_1 Register Field Descriptions
Bit Field Type Reset Description
31-0 INTLINE[n] R/W 0h
Interrupt n enable
0x0 = No effect.
0x1 = Disable IRQ generation.
4079
SPRUH73H–October 2011–Revised April 2013 General-Purpose Input/Output
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
