Texas Instruments AM335 Series

www.ti.com ELM
7.4.5.3 ELM System Status Register (ELM_SYSSTATUS)
The ELM System Status Register (ELM_SYSSTATUS) is shown in Figure 7-143 and described in Table 7-
177.
Figure 7-143. ELM System Status Register (ELM_SYSSTATUS)
31 1 0
Reserved RESETDONE
R-0 R-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 7-177. ELM System Status Register (ELM_SYSSTATUS) Field Descriptions
Bit Field Value Description
31-1 Reserved 0 Reserved
0 RESETDONE Internal reset monitoring (OCP domain). Undefined since:
From hardware perspective, the reset state is 0.
From software user perspective, when the accessible module is 1.
0 Reset is on-going
1 Reset is done (completed)
489
SPRUH73H–October 2011–Revised April 2013 Memory Subsystem
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated