www.ti.com
Interrupt Controller Registers
6.5.1.26 INTC_PENDING_IRQ1 Register (offset = B8h) [reset = 0h]
INTC_PENDING_IRQ1 is shown in Figure 6-29 and described in Table 6-29.
This register contains the IRQ status after masking
Figure 6-29. INTC_PENDING_IRQ1 Register
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PendingIRQ
R-0h
LEGEND: R/W = Read/Write; R = Read only; W1toCl = Write 1 to clear bit; -n = value after reset
Table 6-29. INTC_PENDING_IRQ1 Register Field Descriptions
Bit Field Type Reset Description
31-0 PendingIRQ R 0h
IRQ status after masking
231
SPRUH73H–October 2011–Revised April 2013 Interrupts
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
