www.ti.com
CONTROL_MODULE Registers
9.3.2 control_hwinfo Register (offset = 4h) [reset = 0h]
control_hwinfo is shown in Figure 9-5 and described in Table 9-12.
Figure 9-5. control_hwinfo Register
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ip_hwinfo
R-0h
LEGEND: R/W = Read/Write; R = Read only; W1toCl = Write 1 to clear bit; -n = value after reset
Table 9-12. control_hwinfo Register Field Descriptions
Bit Field Type Reset Description
31-0 ip_hwinfo R 0h IP Module dependent
763
SPRUH73H–October 2011–Revised April 2013 Control Module
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
