WATCHDOG
www.ti.com
20.4.4.1.9 WDT_WTGR Register (offset = 30h) [reset = 0h]
WDT_WTGR is shown in Figure 20-107 and described in Table 20-120.
Writing a different value than the one already written in the Watchdog Trigger Register does a watchdog
counter reload.
Figure 20-107. WDT_WTGR Register
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TTGR_VALUE
R/W-0h
LEGEND: R/W = Read/Write; R = Read only; W1toCl = Write 1 to clear bit; -n = value after reset
Table 20-120. WDT_WTGR Register Field Descriptions
Bit Field Type Reset Description
31-0 TTGR_VALUE R/W 0h
Value of the trigger register
3690
Timers SPRUH73H–October 2011–Revised April 2013
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
To Next Page
Loading...
