www.ti.com
Ethernet Subsystem Registers
14.5.2.2 TX_CONTROL Register (offset = 4h) [reset = 0h]
TX_CONTROL is shown in Figure 14-30 and described in Table 14-41.
CPDMA_REGS TX CONTROL REGISTER
Figure 14-30. TX_CONTROL Register
31 30 29 28 27 26 25 24
Reserved
R-0h
23 22 21 20 19 18 17 16
Reserved
R-0h
15 14 13 12 11 10 9 8
Reserved
R-0h
7 6 5 4 3 2 1 0
Reserved TX_EN
R-0h R/W-0h
LEGEND: R/W = Read/Write; R = Read only; W1toCl = Write 1 to clear bit; -n = value after reset
Table 14-41. TX_CONTROL Register Field Descriptions
Bit Field Type Reset Description
31-1 Reserved R 0h
0 TX_EN R/W 0h TX Enable
0 - Disabled
1 - Enabled
1259
SPRUH73H–October 2011–Revised April 2013 Ethernet Subsystem
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
