www.ti.com
USB Registers
16.5.7.21 QMEMRBASE1 Register (offset = 1010h) [reset = 0h]
QMEMRBASE1 is shown in Figure 16-297 and described in Table 16-311.
Figure 16-297. QMEMRBASE1 Register
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
REG Reserved
R/W-0
LEGEND: R/W = Read/Write; R = Read only; W1toCl = Write 1 to clear bit; -n = value after reset
Table 16-311. QMEMRBASE1 Register Field Descriptions
Bit Field Type Reset Description
31-5 REG R/W-0 0 This field contains the base address of the memory region R.
2129
SPRUH73H–October 2011–Revised April 2013 Universal Serial Bus (USB)
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated
To Next Page
Loading...
Need help?
General
